L'immagine può essere diversa dall'articolo.
Ultra Clear RO DI 30 - Reverse Osmosis Pure Water System
Ordine N.: W3T441748
Prezzo su Richiesta per 1 pezzi Più IVA (22%) più costi di spedizione
- Catalogo parziale: Evoqua Water Technologies
- Article-No: W3T441748
- Categoria: Sistemi ad osmosi inversa
Mostra tutto Sistemi ad osmosi inversa di Evoqua Water Technologies - Confezione/i: 1 pezzi
- Validità: 31.12.2026
- Ultimo Aggiornamento: 31.12.2025
- Articoli Simili: Show (7)
Ultra Clear RO DI 30 - Reverse osmosis system 30 l/h
Ultra Clear® RO DI systems, including reverse osmosis as well as deionization module, economically produce Type II pure water. The systems have a wide range of applications such as feeding ultrapure water systems, dishwashers, photometry, spectrophotometry and media preparation.
Product specification:
Permate capacity at 15°C: 30 l/h
Salt retention rate RO membrane min: 96%
Salt retention rate average: 98%
Bacteria count reduction: > 95%
Yield: max. 75%
Feed water requirements:
hardness-free or hardness-stabilized feed water
Demand: max 75 l/h
Inlet pressure: 0,1 - 5,0 bar
Temperature: 5 - 30 °C
Conductivity: < 1400 µS/cm
TDS: 750 mg/l
CO2: < 20 mg/l
SDI: < 3
Iron (total content): < 0,1 mg/l
free chlorine: < 0,1 mg/l
Technical data:
power consumption: 0,2 kW/h (max)
electr. connection: 100-240 VAC, 50-60 Hz
fuse protection: 6,3 A
Ultra Clear® RO DI systems, including reverse osmosis as well as deionization module, economically produce Type II pure water. The systems have a wide range of applications such as feeding ultrapure water systems, dishwashers, photometry, spectrophotometry and media preparation.
Product specification:
Permate capacity at 15°C: 30 l/h
Salt retention rate RO membrane min: 96%
Salt retention rate average: 98%
Bacteria count reduction: > 95%
Yield: max. 75%
Feed water requirements:
hardness-free or hardness-stabilized feed water
Demand: max 75 l/h
Inlet pressure: 0,1 - 5,0 bar
Temperature: 5 - 30 °C
Conductivity: < 1400 µS/cm
TDS: 750 mg/l
CO2: < 20 mg/l
SDI: < 3
Iron (total content): < 0,1 mg/l
free chlorine: < 0,1 mg/l
Technical data:
power consumption: 0,2 kW/h (max)
electr. connection: 100-240 VAC, 50-60 Hz
fuse protection: 6,3 A
| Descrizione | Valore |
|---|---|
| Descrizione del tipo di prodotto: | Ultra Clear RO DI |
| brevetto regionale: | Evoqua® |
| Conduttività dell'acqua del prodotto: | 28 µS/cm |
| Produzione: | 30 l/h |
| Conduttività dell'acqua di alimentazione: | 1400 µS/cm |
| Tensione di alimentazione: | 110 V AC |
| Tensione di alimentazione: | 240 V AC |
| Larghezza: | 340 mm |
| Profondità: | 420 mm |
| Altezza: | 530 mm |
| Tecnologia di purificazione dell'acqua: | Osmosi inversa |
| AC power plug: | Schuko (type F) |
| Descrizione | Valore |
|---|---|
| WEEE obligation: | sì |
| WEEE registration number: | DE 91825945 |
| WEEE type of equipment: | Large equipment for use in other than private households only |
UV-replacement lamp for 30+60+80 liter Tank UV replacement lamp, 12W, 425mA
For all Ultra...
CO2 Trap CT1 Consumables for Ultra Clear® RO tanks
This filter protects the purified water...
30 l-Tank for Ultra Clear® RO system with level sensor 30 l-Tank for Ultra Clear RO system...
60 l Tank for Ultra Clear RO system with level sensor 60 l Tank for Ultra Clear RO system with...
80 l Tank for Ultra Clear RO system with pump 1.2 l/min 4-20 mA 80 l Tank for Ultra Clear RO...
Deionizsation module VMD VMD deionizsation module for inorganic applications and for protecting...
RO module 15 l/h
This module is being used for the following UltraClear RO Systems:...
Pretreatment module AMB for LaboStar TWF and UltraClear TWF systems Activated carbon / pre-filter...
Deionizsation module VMD VMD deionizsation module for inorganic applications and for protecting...
80 l Tank for Ultra Clear RO system with pump 1.2 l/min 4-20 mA 80 l Tank for Ultra Clear RO...
RO module 15 l/h
This module is being used for the following UltraClear RO Systems:...